Audi Q7 4M 4-pipe tailpipes SQ7 with rear apron retrofit package

Significantly upgrade your AUDI Q7 4M with the 4-pipe "tailpipe trims" of the SQ7 including the SQ7 rear apron.

We are supplying you with the retrofit package for this visually impressive conversion to the AUDI SQ7 look with four tailpipes.

Scope of delivery:

• - 1x original AUDI SQ7 4M rear diffuser / spoiler (depending on model)
• - 1x original AUDI SQ7 4M trim strip for rear diffuser (depending on model)
• - 1x Original AUDI SQ7 4M double tailpipe exhaust cover left (color depending on selection)
• - 1x Original AUDI SQ7 4M double tailpipe exhaust cover right (color depending on selection)
• - 1x original AUDI SQ7 4M various attachments such as holders, screws, caps, etc.

Installation time: approx. 2 - 3 hours

Please select the desired color of the tailpipe trims.

Please enter the chassis number during the ordering process.

You don't know which vehicle equipment (= PR numbers) is installed?

Use our equipment query which you can find HERE, you will receive a detailed list of ALL vehicle equipment and data.

Product attributes:

The retrofitting of the 4-pipe AUDI SQ7 tailpipes with SQ7 rear apron is possible on all AUDI Q7 4M facelift models from model year 2020 with installed S line exterior package (= PR number: 2K7 or 2K8).

NOT suitable for AUDI Q7 models without s-line bumper / exterior package (= PR number: 2K0 or 2K1).

NOT suitable for pre-facelift AUDI Q7 models up to and including model year 2019 (= PR number: GP0).

This retrofit package consists of the new diffuser for the rear bumper, the left + right tailpipe trims and the middle trim strip between the diffuser and bumper.

If a grey/silver spoiler is installed now, you will receive the grey/silver SQ7 spoiler. If a black spoiler is installed now, you will receive the black SQ7 spoiler. If you would like a different variant, please let us know immediately during the ordering process. Otherwise, later changes cannot be taken into account.

After the conversion, the tailpipe trims continue to emit no exhaust gases because the tailpipe of the rear silencer on your AUDI Q7 4M runs downwards and the exhaust system itself is not changed at all. With this SQ7 conversion offered here, only the appearance is changed - no pipe routing of the exhaust system, etc.

Installation information:

The rear bumper is dismantled.

The rear diffuser (= lower attachment) is replaced.

The middle trim strip and the two tailpipe trims are mounted.

For models with a trailer hitch, the recess for the trailer hitch must be cut out.

For models with sensor-controlled tailgate opening, the sensor cable currently installed in the rear diffuser must be mounted in the SQ7 rear diffuser supplied here.