blog posts
Wagner Tuning Performance Intercooler Kit Mercedes Benz C-Class 205
Production time approx. 1-2 weeks

Description
Performance INTERCOOLER KIT Mercedes Benz C / E / GLC 43 AMG
Mercedes Benz W/S/C/A 205 C400 4MATIC 2014-2018
Mercedes Benz W/S/C/A 205 C450AMG 4MATIC 2015-2016
Mercedes Benz W/S/C/A 205 C43 AMG 4MATIC 2016-
Mercedes Benz W/S/C/A 213 E43 AMG 4MATIC 2016-2018
Mercedes Benz W/S/C/A 213 E450 AMG 4MATIC 2018-06/2020
Mercedes Benz X/C 253 GLC 43 AMG 4MATIC 2016-2019
Mercedes Benz C 292 GLE 43 AMG 4MATIC 2015-2019
The 3.0 liter V6 biturbo engine (M 276 DE 30 AL) of the Mercedes 43 AMG models is equipped with an indirect charge air cooling circuit. The cooling process of the charge air is therefore carried out by a water-cooled charge air cooler, which is replaced by the WagnerTuning high-performance charge air cooler.
The WAGNERTUNING high-performance intercooler has a new performance mesh with dimensions of 222 mm x 297 mm x 95 mm. This was specially developed for the high demands of the 43 AMG engine and offers 133% more external mesh volume compared to the original intercooler. The ratio used between the inner and outer cooling surface generates maximum heat transfer and at the same time enables the best possible internal air flow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties with the lowest back pressure. This kit is therefore also suitable for racing. Optimal cooling of the charged air with a significant increase in performance!
All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also straightforward and plug & play with the help of our installation instructions.
Advantages of this product:
- significantly better cooling performance
- less back pressure
- more power and torque for your engine
- mechanical relief of the turbocharger
- 100% compressive strength
- 100% Plug and Play
- up to 4 years warranty
- including Ø57mm (2.25inch) aluminum boost pipe
- optionally with 2x 1/8NPT WMI connections in the upper end box
OEM intercooler core dimensions:
200 mm x 207 mm x 65 mm
V = 2.7 liters
Net dimensions WT intercooler:
222 mm x 297 mm x 95 mm
V = 6.3 liters
Not permitted under the STVO.
Does it fit my car?
We completely understand if you are unsure if a part is compatible with your car, so we strongly recommend you contact us here with your query and our friendly sales team will then be in touch to confirm if this part is the correct part you are looking for.
Manufacturer
customer information
At GG2 Fahrzeugtechnik (R-Trade GmbH) we attach great importance
to inform our customers comprehensively about the intended use of our
products. Please note that, unless otherwise
stated, all our products are specifically designed for professional racing use
These are exclusively for use in competitions
on race tracks that are officially recognized by an racing organization
We would like to point out that any use of our
Products outside these conditions, including leisure trips in
off-road area, potentially violating local, state or federal laws
It is important to understand that GG2 Fahrzeugtechnik (R-Trade
GmbH) assumes no liability for the legality of the use of our products on
public roads. The responsibility for compliance with the
applicable laws is the sole responsibility of the buyer. We recommend our customers
We urge you to familiarize yourself with the respective
to familiarize yourself with the legal provisions and to comply with them.